STANDARD SIZES (custom sizes available)
|
FRAME OPENING Width x Hinge Side
|
|
30” x 48” [762mm x 1219mm]
|
48” x 48” [1219mm x 1219mm]
|
|
30” x 54” [762mm x 1372mm]
|
48” x 54” [1219mm x 1372mm]
|
|
36” x 48” [914mm x 1219mm]
|
48” x 72” [1219mm x 1829mm]
|
|
36” x 60” [914mm x 1524mm]
|
60” x 60” [1524mm x 1524mm]
|
|
42” x 48” [1067mm x 1219mm]
|
|
OPTIONS
-
Stainless steel horizontal springs for easy opening
-
Stainless steel watertight slamlock and other locking devices
-
Bituminous coating on frame surface in contact with concrete
-
Frame skirts for easy casting into a concrete top slab
-
Cushion for noise dampening
-
Fiberglass insulation with metal liner
-
Nut rails with stainless steel sliding nuts for attaching cable holders, brackets and other hardware
-
Custom lettering
-
Anodized finish
-
Stainless steel safety chains
-
Fall Trough Prevention Systems
-
Slip resistant surface bonded to cover plate
-
Hinge covers on same long side
-
Reading lid
|
STANDARD SPECIFICATIONS
The angle frame floor access door shall be Model APD150 as manufactured by U.S.F. Fabrication, Inc. with the size being specified on the plans.
Covers: 3/16-inch (4.8mm) aluminum diamond plate covers reinforced for 150 psf (733 kg/m2) live load. Equipped with cast aluminum flush lifting handle and 316 stainless steel hold-open arms with red vinyl grips that automatically keep the covers in their open/upright positions.
Frame: Extruded aluminum with integral anchor flange and door seat on all four sides.
Hardware: 316 stainless steel hinges and tamper resistant bolts/lock nuts.
Security: Aluminum staple protrudes through cover for user supplied padlock.
Finish: Aluminum covers and frame have mill finish which is protected during shipping and installation by an attached adhesive-backed vinyl material.
Installation: Installation shall be in accordance with the manufacturer’s instructions.
Warranty: Manufacturer shall guarantee against defects in materials and workmanship for a period of ten years.
|