|
STANDARD SIZES (custom sizes available)
|
FRAME OPENING Width x Hinge Side
|
|
29” x 47” [737mm x 1194mm]
|
47” x 47 " [1194mm x 1194mm]
|
29” x 53” [737mm x 1346mm]
|
47” x 53 " [1194mm x 1346mm]
|
35” x 47” [889mm x 1194mm]
|
47” x 71 " [1194mm x 1803mm]
|
35” x 59” [889mm x 1499mm]
|
59” x 59” [1499mm x 1499mm]
|
41” x 47 " [1041mm x 1194mm]
|
|
OPTIONS
-
Stainless steel horizontal springs for easy opening
-
Stainless steel watertight slamlock and other locking devices
- Fiberglass insulation with metal liner
-
Nut rails with stainless steel sliding nuts for attaching cable holders, brackets and other hardware
-
Custom lettering
- Stainless steel safety chains
-
Fall Trough Prevention Systems
-
Slip resistant surface bonded to cover plate
- Mounting holes on vertical/inside frame wall for security
-
Reading lid
-
Hinge covers on same long side
-
Mill finish (no shop primer)
-
Hot dipped galvanized finish
-
All 304 stainless steel material
-
All 316 stainless steel material
|
STANDARD SPECIFICATIONS
The angle frame floor access door shall be Model APD RETROFIT as manufactured by U.S.F. Fabrication, Inc. with the size being specified on the plans.
Covers: 1/4-inch (6.4mm) steel diamond plate covers reinforced for 300 psf (1465 kg/m2) live load. Equipped with steel flush lifting handle and 316 stainless steel hold-open arms with red vinyl grips that automatically keep the covers in their open/upright positions.
Frame: 1/4-inch (6.4mm) steel angle (no beveled edge on horizontal flange) with 9/16-inch (14mm) diameter holes for bolting flange to existing floor.
Hardware: Tamper resistant hinges with recessed stainless steel pins and lugs.
Security: Steel staple protrudes through cover for user supplied padlock.
Finish: Covers and frame have one coat of shop primer.
Installation: Installation shall be in accordance with the manufacturer’s instructions.
Warranty: Manufacturer shall guarantee against defects in materials and workmanship for a period of five years.
|