STANDARD SIZES (custom sizes available)
|
FRAME OPENING Width x Hinge Side
|
|
24” x 24” [610mm x 610mm]
|
36” x 36” [914mm x 914mm]
|
30” x 30” [762mm x 762mm]
|
42” x 42” [1067mm x 1067mm]
|
|
30” x 54” [762mm x 1372mm]
|
48” x 48” [1219mm x 1219mm]
|
36” x 30” [914mm x 762mm]
|
|
OPTIONS
-
3/16-inch (4.8mm) thick aluminum smooth plate cover
-
Exertior padlock staple
-
Cylinder deadbolt lock keyed exterior, interior or both
-
Removable exterior slamlock handle with choice of slotted plug or tamper resistant plug.
-
Indicator switch to signal when cover is not fully closed
- Anodized finish
-
Stainless steel safety chains with aluminum support posts
-
Custom lettering
|
STANDARD SPECIFICATIONS
The security, reservoir & roof angle frame access door shall be Model SRR-E as manufactured by U.S.F. Fabrication, Inc. with the size being specified on the plans.
Cover: 3/16-inch (4.8mm) aluminum diamond plate cover reinforced for 150 psf (733 kg/m2) live load. Equipped with a 316 stainless steel hold open arm with push/pull handle that automatically keeps the cover in its open/upright position.
Lift Assist: Open compression springs for lift assist.
Frame: 3/16-inch (4.8mm) aluminum angle with weather seal gasket and 7/16-inch (11mm) diameter holes for bolting to surface (others responsible for providing effective seal between frame and the surface).
Hardware: 316 stainless steel pins hold aluminum lugs welded to frame and cover.
Security: A 316 stainless steel slamlock with fixed exterior and interior handles and interior padlock staple.
Finish: Cover and frame are mill finish aluminum.
Installation: Installation shall be in accordance with the manufacturer’s instructions.
Warranty: Manufacturer shall guarantee against defects in materials and workmanship for a period of ten years.
|