STANDARD SIZES (custom sizes available)
|
FRAME OPENING Width x Hinge Side
|
|
23” x 23” [584mm x 584mm]
|
29” x 47” [737mm x 1194mm]
|
23” x 29” [584mm x 737mm]
|
35” x 35” [889mm x 889mm]
|
23” x 35” [584mm x 889mm]
|
35” x 47” [889mm x 1194mm]
|
29” x 29” [737mm x 737mm]
|
41” x 41” [1041mm x 1041mm]
|
|
29” x 35” [737mm x 889mm]
|
|
OPTIONS
-
Stainless steel horizontal springs for easy opening
-
Stainless steel watertight slamlock and other locking devices
-
Bituminous coating on frame surface in contact with concrete
- Cushion for noise dampening
-
Fiberglass insulation with metal liner
-
Nut rails with stainless steel sliding nuts for attaching cable holders, brackets and other hardware
-
Custom lettering
-
Anodized finish
-
Stainless steel safety chains with aluminum support posts
-
Fall Trough Prevention Systems
-
Slip resistant surface bonded to cover plate
- Mounting holes on vertical/inside frame wall for security
-
Reading lid
|
STANDARD SPECIFICATIONS
The angle frame floor access door shall be Model APS150 RETROFIT as manufactured by U.S.F. Fabrication, Inc. with the size being specified on the plans.
Cover: 3/16-inch (4.8mm) aluminum diamond plate cover reinforced for 150 psf (733 kg/m2) live load. Equipped with cast aluminum flush lifting handle and 316 stainless steel hold-open arm with red vinyl grip that automatically keeps the cover in its open/upright position.
Frame: Extruded aluminum angle with beveled edge on horizontal flange that slopes to floor surface, 9/16-inch (14mm) diameter holes for bolting flange to existing floor, and an integral door seat on all four sides.
Hardware: 316 stainless steel hinges and tamper resistant bolts/lock nuts.
Security: Aluminum staple protrudes through cover for user supplied padlock.
Finish: Aluminum cover and frame have mill finish.
Installation: Installation shall be in accordance with the manufacturer’s instructions.
Warranty: Manufacturer shall guarantee against defects in materials and workmanship for a period of ten years.
|