|
AHD
Angle Frame, Heavy Duty, Double Door
The heavy duty angle type floor access doors are designed for interior and exterior applications where watertightness is not required. They are intended for off street locations that may occasionally receive AASHTO H-20 wheel loads.
AHS
Angle Frame, Heavy Duty, Single Door
The heavy duty angle type floor access doors are designed for interior and exterior applications where watertightness is not required. They are intended for off street locations that may occasionally receive AASHTO H-20 wheel loads.
ALH
Aircraft Load Hatch
The aircraft load floor access doors are designed for areas which receive loads up to 280 p.s.i. over the entire surface of the cover and where watertightness is not required. They are intended for the airside at airports, marine ports and other areas of extremely heavy and severe loading conditions.
APD
Angle Frame, Pedestrian Loading, Double Door
The angle frame floor access doors are designed for interior and exterior applications where watertightness is not required.
APD - Retrofit
Angle Frame, Pedestrian Loading, Double Door
The retrofit angle frame floor access doors are designed for interior and exterior applications where watertightness is not required and the frame is to be placed into an existing opening.
APS
Angle Frame, Pedestrian Loading, Single Door
The angle frame floor access doors are designed for interior and exterior applications where watertightness is not required.
APS - Retrofit
Angle Frame, Pedestrian Loading, Single Door
The retrofit angle frame floor access doors are designed for interior and exterior applications where watertightness is not required and the frame is to be placed into an existing opening.
BPC
Basin, Pedestrian Loading, Cover
The basin covers are designed for interior and exterior applications where watertightness is not required. This economical design has the cover bolted directly to the basin without a frame, hold open arm or springs; this allows the cover to open a full 180 degrees.
BPS
Basin Cover, Pedestrian Loading, Single Door
The basin covers are designed for interior and exterior applications where watertightness is not required and the cover is to be bolted down to the basin.
Emergency Exit Doors
Designed to provide emergency egress from underground rapid transit systems and tunnels. Intended for off street locations that may occasionally receive AASHTO HS20-44 wheel loading. STANDARD FEATURES: stainless steel hardware, stainless steel hinges, stainless steel automatic hold-open arm with red vinyl grip, flush drop handle, tamperproof fasteners, stainless steel springs for lift assist, stainless steel panic hardware, handrails, custom signage and slip resistant cover finish.
AVAILABLE IN: aluminum only.
WARRANTY: 10 years on aluminum.
FPS
Floodtight, Pedestrian Loading, Single Door
The floodtight floor access doors are designed for interior and exterior applications where water may rise above the surface opening.
R-APS
Recessed, Angle Frame, Pedestrian Loading, Single Door
The recessed angle frame floor access doors are designed for interior and exterior applications where watertightness is not required. They have a 1/8 inch recess to receive tile or carpet.
RPS
Round Frame, Pedestrian Loading, Single Door
The round floor access doors are designed for interior and exterior applications where watertightness is not required and the frame is to be cast into concrete.
R-TPS
Recessed, Trough Frame, Pedestrian Loading, Single Door
The recessed trough frame floor access doors with drainable frames are designed for interior and exterior applications where dirt and water are to be prevented from falling into area below. They have a 1 inch recess to receive tile or concrete.
THD
Trough Frame, H20 Loading, Double Door
The heavy duty trough type floor access doors with drainable frames are designed for interior and exterior applications where dirt and water are to be prevented from falling into area below. They are intended for off street locations that may occasionally receive AASHTO H-20 wheel loads.
THS
Trough Frame, H20 Loading, Single Door
The heavy duty trough type floor access doors with drainable frames are designed for interior and exterior applications where dirt and water are to be prevented from falling into area below. They are intended for off street locations that may occasionally receive AASHTO H-20 wheel loads.
TPD
Trough Frame, Pedestrian Loading, Double Door
The trough type floor access doors with drainable frames are designed for interior and exterior applications where dirt and water are to be prevented from falling into area below.
TPS
Trough Frame, Pedestrian Loading, Single Door
The trough type floor access doors with drainable frames are designed for interior and exterior applications where dirt and water are to be prevented from falling into area below.
W-APS
Watertight, Angle Frame, Pedestrian Loading, Single Door
The angle frame floor access doors are designed for interior and exterior applications where watertightness is required.
|