LEED Statement

LEED information on the A36 steel material used in the manufacturing of its steel access doors: the percentages shown represent the most conservative data obtained from our suppliers. Both the point of manufacture and the sources of raw material are greater than 500 miles from the jobsite.

Mill Groups

Bar

Beam

Plate

Sheet

rebar, angle, round, flat, other narrow & wide structural beams heavy plate hot band, cold rolled, pickled
Total Scrap Used

97.7%

61.2%

92.1%

61.2%

Total Alloys & Other Iron Units

2.3%

38.8%

7.9%

38.8%

Total Post Consumer Recycled Content

85.0%

53.1%

80.1%

53.2%

Total Pre-consumer Recycled Content

13.0%

7.9%

11.9%

8.0%

Data Sources: (1) Nucor Ltr, dtd 24 Nov 2008

                         (2) SSAB Ltr, dtd 1 Apr 2009

LEED information on the aluminum material used in the manufacturing of aluminum access doors: the percentages shown represent the most conservative data obtained from our suppliers. Both the point of manufacture and the sources of raw material are greater than 500 miles from the jobsite.
Extrusion(3) Floor Plate(2) Smooth Plate(1)
Recycled Content:
Post Consumer: 10% 0% 3.3%
Post Industrial: 40% 10.35% 38.7%
Virgin Material: (no rpt) 89.65% (no rpt)
Combined Calculated
Recycled Content:
45% (no rpt) 22.7%

Notes:   (1) Alcoa Ltr, dtd 1 Aug 2008-Smooth Plate

(2) Novelis Chart, dtd 8 Apr 2009-Floor Plate

(3) Sapa Extrusions, Inc. Ltr, dtd 29 Jan 2010-Extrusion

You are not logged in.
Contact Us:
USF Fabrication, Inc
3200 W 84th St
Hialeah, FL 33018
(800)258-6873
  USF Fabrication, Inc
2382 Rulon White Blvd
Ogden, UT 84404
(800)258-6873

We welcome any feedback, questions or comments